Skip to content
English
  • There are no suggestions because the search field is empty.

06.08 Vendor Evidence and Contracts

Keep a vendor's certificates, reports and other evidence on its Evidence tab with expiry dates and gap tracking, record its contracts and their key terms on the Contracts tab, and use the Manage Contracts page to see what's expiring, list every contract and compare terms across vendors in the terms matrix.

Requires: Vendor Risk Management Extra

A vendor's Evidence and Contracts tabs and the Manage Contracts page come with the Vendor Risk Management Extra. Without it, the tabs and the menu entry show as locked. Adding evidence from a questionnaire answer also needs the Assessments Extra, which SimpleRisk's messages call the Risk Assessment Extra.

Why this matters

A vendor review produces paper. The SOC 2 report, the ISO certificate, the penetration test summary, the cyber insurance certificate: each one is the proof behind a "yes" on a questionnaire, and each one goes stale on a date printed on its first page. Most programs keep these in a shared folder and find out a certificate lapsed when an auditor asks for the current one.

Contracts have the same problem with higher stakes. The renewal date matters less than the notice deadline before it, the day after which you can no longer walk away. Miss that and you're signed up for another year on terms you might have wanted to renegotiate. And when someone asks "which of our vendors don't give us audit rights?", the honest answer is usually "let me read forty PDFs".

The NIST Cybersecurity Framework (CSF) 2.0 expects supplier requirements to be written into contracts and monitored for the life of the relationship, and the supplier controls in ISO/IEC 27001:2022 Annex A expect you to agree security requirements with each supplier and review their delivery against them. The Vendor Risk Management Extra gives both a home on the vendor. Evidence carries its own expiry date and the vendor's tier says what must be on file. Contracts carry their dates and a fixed set of key terms, and each term is compared with the position your organization prefers. The Manage Contracts page then puts every vendor's dates on one calendar and every contract's terms in one table.

Before you start

  • The right permissions. Every part of this article needs Allow Access to "Vendor Risk" Menu and Able to View Vendors, or a permission that includes viewing (Able to Manage Vendors or Able to Configure Vendor Risk Management). On top of that, evidence and contracts are separate families, and holding one never shows you the other:
  • Able to Manage Vendor Evidence lets you add, edit, replace and delete evidence.
  • Able to Run Vendor Due Diligence lets you read evidence, including notes and files, without changing it.
  • Able to View Vendor Contracts lets you read contracts, their values and their terms.
  • Able to Manage Vendor Contracts lets you add, edit and delete contracts and set their terms. It includes viewing.
  • For adding evidence from a questionnaire answer, also Allow Access to "Assessments" Menu and Able to View Questionnaire Results, with the Assessments Extra active.
  • A tier on the vendor, if you want SimpleRisk to tell you what evidence is missing or which contract terms are required. An untiered vendor has no gaps and no required terms. See Vendor Intake and Tiering.
  • A file under the size limit. Your administrator sets a maximum file size for evidence and contract files, and the server's own limits can bring it lower. The upload field tells you the current limit, for example Files up to 3.5 MB can be uploaded. The file must also be one of the types your administrator allows for uploads.

Encryption availability. In this release, evidence and contract files, evidence notes, contract values, SLA summaries, contract notes and term values are stored as entered, not encrypted. They will be encrypted once SimpleRisk's built-in encryption is available; the Vendor Risk Management Extra does not use the Encrypted Database Extra. Until then, don't put secrets in these fields. After encryption arrives, saving or reading them also needs a working encryption key, and your administrator restores it if it goes missing.

Step-by-step

1. Read a vendor's evidence

Open Vendor Risk, then Manage Vendors, open the vendor and choose the Evidence tab. It has two parts.

Required for this tier and missing lists the evidence types the vendor's tier requires and the vendor doesn't currently have. When nothing is missing, it says Nothing the vendor's tier requires is missing. Your administrator decides which types each tier requires. A required type counts as covered when the vendor has an item of that type that is Valid or Expiring soon. An item with no expiry date covers it only for a type that never expires, such as a signed data processing agreement. An undated SOC 2 report doesn't close the gap until someone enters its expiry date.

Below it, the Evidence card lists the vendor's items, with their Type, Title, Issued, Expires, Status, File and Notes columns. Each item's status comes from its expiry date:

  • Valid: the expiry date is further out than the evidence lead time your administrator set, 30 days unless they changed it.
  • Expiring soon: it expires within that lead time.
  • Expired: the date has passed.
  • No expiry: the item has no expiry date.

The download button in File saves the item's file. An item with notes has a View button in Notes, which opens Evidence details with the notes and the stored file name. The list shows the first 100 items; a vendor with more says Showing the first 100 of {total} evidence items.

2. Add or replace evidence

With Able to Manage Vendor Evidence, select Add evidence and fill in:

  • Type: one of the evidence types your administrator has enabled.
  • Title: up to 255 characters, for example SOC 2 Type II report, FY2026.
  • Issued: the date on the document.
  • Expires: leave it empty and SimpleRisk works it out from the type's default validity, counted from the issue date. A SOC 2 Type II report issued on 15 March 2026 expires on 15 March 2027 under the shipped 12-month validity. Type a date to override it. A type with no default validity, or an item with no issue date, gets no expiry date unless you enter one.
  • Notes: up to 20,000 characters.
  • File: optional. The field shows the current limit, and warns you before you send a file that's larger.

Select Save. The new item's status and the gap list update straight away.

Use the date printed on the document, not the day you upload it. Enter today and the expiry is counted from the wrong day, so the register calls a certificate current for months after it lapsed. An auditor who spots that once will check every other date you show them.

To change an item, select its pencil button. The form shows the current file and offers Replace file. A new file replaces the old one for good. On an edit, clearing Expires means the item doesn't expire; the type's default only applies when you first add an item. To remove an item and its file, select the trash button and confirm Delete: Delete this evidence item and its file? This cannot be undone.

3. Add evidence from a questionnaire answer

If you sent the vendor a questionnaire through due diligence and a respondent attached a file to an answer, you don't need to download it and upload it again. Select Add from an assessment answer. The dialog lists the files attached to the answers of questionnaires sent from this vendor, with each file's name and size. One already turned into evidence is marked Already imported. Pick the file and a Type, then select Import.

The new item takes the type's name as its title and has no dates. Open it with the pencil button and enter the issue and expiry dates, or it shows No expiry and won't close a gap for a type that expires. The file is checked like any upload, against the size limit and the allowed file types, so an oversized or unusual attachment is refused. Once imported, the file is ordinary evidence: everyone who can read this vendor's evidence can download it, including colleagues who run due diligence but have no access to the Assessments Extra. Import an attachment only if they may see it.

The button needs Able to Manage Vendor Evidence, Allow Access to "Assessments" Menu and Able to View Questionnaire Results. If you hold those but the Assessments Extra isn't active, the card says Importing a questionnaire file needs the Risk Assessment Extra. Vendor Due Diligence and Reassessment covers sending the questionnaire in the first place.

4. Record a contract

Choose the vendor's Contracts tab. The list shows each contract's Title, Start Date, End Date, Renewal Date, Notice deadline, Status and Owner, with a button to download its document. The contract's value isn't in the list. You see it when you open the contract with the eye button, which shows every field, the document's name and the terms.

With Able to Manage Vendor Contracts, select Add contract and fill in:

  • Title: up to 255 characters. It's the only required field.
  • Start Date, End Date and Renewal Date. The end can't be before the start.
  • Notice period (days): how long before the renewal date you have to give notice, from 0 to 3,650 days.
  • Contract value and Currency: a number with at most two decimal places, and a three-letter code such as USD. Enter both or neither. The currency is turned into capitals as you type.
  • Owner: the person in your organization who looks after the contract. Reminders go to them.
  • Document: the signed contract, optional.
  • SLA summary and Notes: up to 20,000 characters each.

Select Save. To change a contract, use its pencil button; the document field then reads Replace file. To remove one, use the trash button. The warning says Delete this contract with its document and its term values? This cannot be undone.

SimpleRisk works out the Notice deadline as the renewal date minus the notice period. A contract renewing on 1 July with 60 days' notice has a notice deadline of 2 May. That's the date to put in your diary, and the reason the field exists: by the renewal date itself it's usually too late to say no.

Each contract's Status comes from its dates and the contract renewal lead time your administrator set, 60 days unless they changed it. The first rule that fits wins:

  • Not Started: the start date is in the future.
  • Ended: the end date has passed.
  • Renewal due: the renewal date hasn't passed, and the notice deadline (or the renewal date, when there's no notice period) is within the lead time or already past. It stays Renewal due after the notice deadline passes, until the renewal date itself.
  • Ending soon: the end date is within the lead time.
  • Active: none of the above.

5. Set the contract's terms

The Edit terms button on a contract's row opens one control per contract term your administrator has enabled. SimpleRisk ships sixteen, such as Limitation of liability, Breach notification window, Audit rights, SLA uptime and Payment terms, and your administrator can change and add to them. Each control suits its term:

  • free text in a box, up to 5,000 characters;
  • a single choice from a list, or several choices as tick boxes;
  • yes or no;
  • a number, with its unit beside it (for example hours or percent);
  • an amount with a basis, such as 12 Months of fees;
  • a date.

Under each term you'll see its preferred position, such as Preferred: at least 99.9 percent or Preferred: at least 12 (Months of fees), and a badge comparing the value with it:

  • Preferred: the value meets the preferred position. A value exactly at the threshold counts.
  • Deviation: the value is outside it. An SLA of 99.5 percent against a preferred minimum of 99.9 is a deviation.
  • Missing: the term is required for the vendor's tier and has no value.
  • Not valid: the stored value no longer fits the term's definition.

A term with no preferred position, and every free text or date term, never gets Preferred or Deviation. Leave a term empty to clear its value. Select Save and only the terms you changed are sent.

Don't record what the contract should say. Record what it does say, even when it's bad news. A deviation flag is the point: it's how the terms matrix finds the contracts worth renegotiating.

If your contract leaves liability uncapped, there's no "Unlimited" basis to choose. Leave Limitation of liability empty and say so in the contract's Notes. If the vendor's tier requires that term, it then shows Missing, and the contract turns up whenever someone filters the matrix to flagged terms.

You don't have to read the whole contract to fill these in. With Able to Extract Terms from Vendor Contracts, the Extract terms button on a contract with a PDF or Word document has the AI provider your administrator set up propose a value for each term and date, with the passage it came from, and Proposed terms lists them for someone with Able to Manage Vendor Contracts to accept, edit or reject. Nothing is saved to the contract until a person accepts it. Extracting Contract Terms with AI covers what is sent to the provider and how to check a proposal.

6. Use the Manage Contracts page

Select Vendor Risk, then Manage Contracts. The page has up to three views, depending on your permissions. In each view, select anywhere on a row to read that contract's details (or the evidence item's, for an evidence row) in a window over the page, so the view, its filters and its page stay as they are. The window is read-only and has an Open vendor link to the vendor's Contracts tab (or Evidence tab); editing stays on the vendor's page.

Expiry calendar lists what falls due across every vendor you can see. Due within sets the window: Next 30 days (the default), Next 60 days, Next 90 days or Next 365 days. Each row shows the Date, a status such as Due in 12 days or Overdue · 3 days, the Type of date, the Title and a link to the Vendor. The types are:

  • Evidence expiry, for evidence expiring in the window or that expired within the same number of days back. Evidence that lapsed longer ago drops off the calendar; the vendor's own Required for this tier and missing card keeps flagging required evidence that was never renewed.
  • Notice deadline, for a contract with a notice period whose deadline falls in the window. A deadline that has passed while the renewal is still ahead shows as overdue.
  • Renewal Date and End Date, for those dates in the window.

Overdue rows come first, with a coloured stripe as well as the label, and then everything else by date. Ended contracts are left out. The vendor link opens that vendor's Evidence or Contracts tab.

Contracts lists every contract you can see, across vendors, with its Title, Vendor, End Date, Renewal Date, Notice deadline, Status and Owner. Filter with Search (the title or the vendor's name), Status, Ending or renewing within and Vendor.

Terms matrix is the view that answers the "which vendors don't give us audit rights?" question. It has one row per contract. The first column stays pinned at the left while the terms scroll under it, and shows the vendor (select it to open the vendor), the contract title under it and the vendor's tier. Flags comes next: the number of the contract's terms that are flagged, whether or not those terms are showing as columns, or a dash when none is. The terms follow, one column each. A Yes or No term shows a check mark or a cross, a long value is cut short (hover over it to read it all), and a flagged value carries a coloured dot. Hover over the dot for its label: Deviation, Missing or Not valid. The Flags legend under the table explains each one.

  • Terms shown picks the columns, up to 25. It starts with the first six enabled terms, so the table fits the page, and it remembers your choice in this browser. Select Restore default layout in the picker to go back to the six. Showing more terms makes the table scroll sideways inside its card, with the first column pinned (on a phone-width screen the first column scrolls with the rest).
  • Search vendors, All tiers, Only contracts with a flagged term and Include ended contracts narrow the rows. Ended contracts are hidden until you tick the last one.
  • Term filter compares one term with a value: pick the term, a Condition such as is, is less than or has no value, then a value, and select Apply. is flagged finds every deviation, missing and invalid value for that term.
  • Select a column heading to sort by it, and again to reverse it. The first column sorts by Vendor, with Tier as a second sort beside it; sorting by Tier orders by risk, not by name. The matrix opens sorted by Flags, most flagged first, so the contracts that need attention are on top. Contracts with no value in the sorted term always come last.

A useful habit before a renewal conversation: filter the matrix to the vendor, tick Only contracts with a flagged term, and take the list into the meeting.

7. Know who sees what

Able to Run Vendor Due Diligence

  • Vendor tabs: Evidence, read-only
  • Manage Contracts: Expiry calendar with evidence dates only

Able to Manage Vendor Evidence

  • Vendor tabs: Evidence, with add, edit, delete and import
  • Manage Contracts: Expiry calendar with evidence dates only

Able to View Vendor Contracts

  • Vendor tabs: Contracts, read-only
  • Manage Contracts: All three views, with contract dates on the calendar

Able to Manage Vendor Contracts

  • Vendor tabs: Contracts, with add, edit, terms and delete
  • Manage Contracts: All three views, with contract dates on the calendar

Hold one from each family and you get both, and the calendar shows both kinds of date. Without any of them, Manage Contracts isn't in your menu. The menu entry is called Manage Contracts even for someone who only sees evidence on it. Team visibility applies throughout: a vendor you can't see contributes nothing to any list, the calendar or the matrix.

8. Know who gets reminded

Unless your administrator has turned vendor notifications off, SimpleRisk sends reminders once a day for vendors that are Onboarding, Active or Offboarding:

  • Evidence: the vendor's Business Owner gets Vendor evidence expiring: {title} ({vendor}) when an item comes within the evidence lead time, and Vendor evidence expired: {title} ({vendor}) when it lapses. An item with no expiry date never produces one. Neither does an item the vendor has renewed: once a newer item of the same type expires later, the old one goes quiet. An undated item only counts as a renewal for a type that never expires, so importing this year's report from an answer doesn't silence last year's until you date it. The "expired" email goes out only in the 30 days after the date passes (longer if the evidence lead time is longer), so entering last year's report for the record mails nobody.
  • Contracts: the contract's Owner, or the vendor's Business Owner when the contract has no owner, gets an email as the notice deadline approaches, another if it passes while the renewal is still ahead, one before the renewal date, and one before the end date of a contract with no renewal date.

Each email goes once per item, date and stage, so changing a renewal date starts a fresh set. A reminder goes only to someone who could open the item in SimpleRisk: an enabled account with an email address, the Vendor Risk menu, a view permission and the matching evidence or contract permission, and, under team separation, a team that can see the vendor. A contract owner who can't see contracts doesn't get the email, and it doesn't fall back to the business owner either.

Things to know

  • Notice deadlines far in the future don't show on the calendar. The calendar looks at contracts that end or renew within the next 365 days, so a notice deadline for a renewal more than a year away is missing, even with a long notice period. The contract's own Notice deadline column is always right.
  • The vendor tabs show the first 100 items. A vendor with more evidence items or contracts says how many it's showing. The calendar reads at most 500 records from each list, and says Some dates may not be shown: the calendar reads at most 500 records from each list. when there were more.
  • File names keep only the part after the last slash. A name containing a slash or a backslash is cut to what follows it, so Q3/SOC2.pdf is stored as SOC2.pdf. Quotes, apostrophes, semicolons and control characters are dropped, and the name is cut to 200 characters.
  • The matrix has a ceiling. When more than 20,000 contracts match across all vendors, including ones you can't see, or the rows would take too much of the server's memory, it asks you to narrow the vendor search, choose a tier or hide ended contracts.
  • The calendar's "today" is fixed when the page loads. Leave it open overnight and reload it before you trust the overdue counts.

Common pitfalls

  • Uploading evidence without an issue date. The expiry can't be worked out, so the item shows No expiry and a required type stays missing. Enter the date on the document.
  • Forgetting to date an imported answer. Evidence added from a questionnaire answer has no dates. Edit it straight away.
  • Recording the renewal date and not the notice period. Without a notice period there's no notice deadline, no notice reminder and no warning until the renewal is already upon you.
  • Expecting the contract value in the list. It's only shown when you open the contract, and only to people with a contracts permission.
  • Giving someone evidence permissions and expecting them to see contracts, or the other way round. The two families are separate on purpose: the people who handle security evidence often shouldn't see commercial terms.
  • Leaving the contract owner as someone without contract access. They're never reminded, and nobody else is either.
  • Deleting an expired certificate when the new one arrives. Add the new one instead. The old item drops off the calendar on its own, and the history shows what you had on file at the time.

Related